All
Plasma Monitoring with Modular Spectroscopy
In this application note, we used a modular spectrometer to monitor changes in argon emission after different gases were added to a closed-reaction plasma chamber.
Five Reasons to Consider Fully-Automated Enzyme Assays
Measuring enzyme activity and enzyme assay can be influenced by many variables. Automated enzyme analyzers simplify the overall method development and results reliability.
Element Impurities in LiPF6 Electrolyte Solutions
This note demonstrates sensitive, robust, fast, and straightforward analysis of trace elements in lithium hexafluorophosphate electrolyte samples by ICP-OES.
Whisky Analysis by Raman Spectroscopy
This application note details the quantitative use of Raman spectroscopy to determine ethanol content in samples of whisky.
Low-volume ATR Measurements of Oils
Using a low-volume, multiple reflection ATR, infrared spectra of new and in-service motor oil were collected. Example spectra are presented.
Updates on Metals in Baby Food
Raman Technology for Today's Spectroscopists 2022
Quantification and Identity Testing of Soft Gel Capsules using Transmission Raman Spectroscopy
Quantification of Tablets Containing Multiple APIs Using Transmission Raman Spectroscopy
Guide to TRS100 Analytical Method Development
Quality Control Measurement of 12 Elements in Lithium Hexafluorophosphate
This study was conducted to measure 12 elements in LiPF6 electrolyte and address the challenges of buildup of carbon on the torch of ICP-OES instruments.
New Hand-Held Raman Spectrometer Enables Identification of Raw Materials Containers in Pharmaceutical Warehouses
Determination of 14 Impurity Elements in Lithium Carbonate
Measurement of Al, Ca, Cd, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, S, Si, and Zn in Li2CO3 using method of standard addition (MSA), in Lithium (Li)-ion batteries is demonstrated.
Determination of Elemental Impurities in Graphite-Based Anodes
Fast, accurate determination of Fe, Al, As, Ba, Be, Cd, Co, Cr, Cu, K, Mg, Mn, Na, Ni, Pb, Sr, V, and Zn in graphite-based anode materials
Determination of 25 Elements in Materials for Lithium Battery Cathodes
Agilent 5110 VDV ICP-OES spectrometer used to establish rapid analysis method for determining impurities and major elements in lithium nickel cobalt manganate oxide
Lab Hacks for Analysis of Organic Samples
The Use of Certified Reference Materials in Atomic Spectroscopy for Organics
Monitoring of Protein Unfolding and Folding
This application brief describes the procedure for measurement of 0.5 mg/mL solution of a-chymotrypsinogen in 10 mM NaCl buffer.
Pharmaceutical Assay and Multicomponent Analysis
Determine the quantity and percent assay of paracetamol according to U.S. Pharmacopeia’s (USP) methods, and component concentration in pharmaceutical formulations.
Quantification of Sodium Hypochlorite in Disinfectants
Simple and fast solution for the measurement of sodium hypochlorite in a QA/QC setting where speed and accuracy are vitally important.
Determination of Nitrite levels in Engine Coolant v2
This application describes EPA method 354.1 as a template to accurately determine nitrite levels as ppm NO2- in O2 glycol-based aqueous engine coolants.
Improving Lithium-Ion Batteries eBook with Raman
Lean Manufacturing with Raman Spectroscopy
Raman Microscopy Essential Knowledge Booklet
Cutting-Edge Cryogenic Raman Microscope v2
This white paper describes applications of cryoRaman, a cryogenic Raman microscope offering VIS to NIR excitation, high magnetic fields, and full polarization control.
Measuring Toxic Elements in Workplace Filter Dusts According to EN 14385 Using ICP-MS
The PlasmaQuant ICP-MS allows for a robust, sensitive, and accurate multi-element analysis of relevant workplace hazardous substances in digested filter dusts.
Detecting Solvent Impurities Via ATR
FTIR-ATR sampling was used to detect contaminants in acetone. By evaporating the solvent directly onto the ATR crystal, the impurities were easily measured.
Thermal Analysis in the Semiconductor Packaging Industry
This application note describes the applications of thermal analysis in semiconductor assembly and packaging.
Handbook of ICP-QQQ Applications using the Agilent 8800 and 8900
This compendium contains over 80 methods for the analysis of trace elements in a wide range of sample types across a wide range of industries.
New Spectrometer Excels for Absorbance Measurements v2
In this application note, we evaluate the effectiveness of a new spectrometer for measuring the absorbance of optical filters and potassium dichromate standards.