Application Notes: Atomic

This note demonstrates sensitive, robust, fast, and straightforward analysis of trace elements in lithium hexafluorophosphate electrolyte samples by ICP-OES.

Using iCRC technology for interference removal, we demonstrate the measurement of 82 drinking water samples per hour with 21 elements (+4 internal standards).

Sample digestion with the Milestone ultraWAVE takes around one hour including cool-down time.

Glass Expansion’s Peltier Cooled Cyclonic (PCC) Spray Chamber Kit is fully compatible with the Agilent® 7900 and 8900, and with the legacy Agilent® ICP-MS models.

In this application note, we discuss the implementation of offset phase locking using a digital phasemeter, and characterize the stability of phase locking two lasers.

This application note demonstrates the performance for the measurement of sulfur in ultra-low sulfur diesel using full polarization in 90° Cartesian geometry EDXRF.

Since antigens used in pharmaceutical vaccine production typically consist of proteins, the analytical quantification of total protein is a method of choice.

HR ICP-OES with high-resolution optical system, superior sensitivity, matrix tolerance achieves lowest LOD for trace element analysis in complex water-alcohol-oil samples

HR ICP-OES with high-resolution optical system, superior sensitivity, and matrix tolerance achieve sub-ppb detection limits for trace element analysis in saline matrices

This application note describes different application methods for the fast and reliable determination of widely varying sulfur contents.

This application note demonstrates how LECO’s GDS900 can be utilized to characterize carburized steel using the standard low alloy steel method for bulk analysis.

This application note demonstrates whether the active pharmaceutical ingredient maintains its original crystal system, and whether there are polymorph impurities.

This application note describes the analysis of heavy metals in cannabis with high sensitivity, precision, and accuracy using HR ICP-OES.

This application note describes a fast and simple means of obtaining elemental composition of unknown sample materials using the Rigaku NEX DE VS elemental spectrometer.

Inprentus offers custom-designed blazed diffraction grating masters with rights for replication. A variety of substrate materials and thin film overcoatings are available.

This application note demonstrates the robust analysis of 25% NaCl samples by ICP-OES. The analysis is simplified by using ceramic D-Torch and the sheath gas.

This application note demonstrates how to perform point and mapping analysis on the Rigaku ZSX Primus IV / Primus IVi general purpose WDXRF spectrometers.

This application note reviews a new series of high-performance PFA nebulizers that were designed for low sample volume ICP-MS applications and feature a demountable uptake line.

This application note discusses specular reflectance as a technique to analyze polymer samples using a Nicolet Summit FTIR spectrometer

Application of HR-CS Flame AAS for determination of macro-micro and ultra-micro element contents using only one dilution factor in a single measurement run.

This study shows Raman imaging, atomic force microscopy, and scanning near-field optical microscopy characterizing and depth-profiling polymer blends and layers.

This application note demonstrates the analysis of gold alloys by EDXRF for the determination of gold and silver content, and of base metals and other alloying metals.

This application note reviews a new series of high-performance PFA nebulizers that were designed for low sample volume ICP-MS applications and feature a demountable uptake line.

This triple quadrupole ICP-MS method development guide demonstrates how interferences can affect the detection of elements and how to overcome them.

This application note demonstrates the use of the SQX Scatter Fundamental Parameter (FP) method for the screening of materials difficult to analyze by conventional SQX.

This application note reviews a new series of high-performance PFA nebulizers that were designed for low sample volume ICP-MS applications and feature a demountable uptake line.

This application note describes standard test method ASTM D5185 for determination of additive elements, wear metals, and contaminants by ICP-OES.