Application Notes: General

This study was conducted to measure 12 elements in LiPF6 electrolyte and address the challenges of buildup of carbon on the torch of ICP-OES instruments.

Measurement of Al, Ca, Cd, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, S, Si, and Zn in Li2CO3 using method of standard addition (MSA), in Lithium (Li)-ion batteries is demonstrated.

Fast, accurate determination of Fe, Al, As, Ba, Be, Cd, Co, Cr, Cu, K, Mg, Mn, Na, Ni, Pb, Sr, V, and Zn in graphite-based anode materials

Agilent 5110 VDV ICP-OES spectrometer used to establish rapid analysis method for determining impurities and major elements in lithium nickel cobalt manganate oxide

The PlasmaQuant ICP-MS allows for a robust, sensitive, and accurate multi-element analysis of relevant workplace hazardous substances in digested filter dusts.

FTIR-ATR sampling was used to detect contaminants in acetone. By evaporating the solvent directly onto the ATR crystal, the impurities were easily measured.

This application note describes the applications of thermal analysis in semiconductor assembly and packaging.

This compendium contains over 80 methods for the analysis of trace elements in a wide range of sample types across a wide range of industries.

In this application note, we evaluate the effectiveness of a new spectrometer for measuring the absorbance of optical filters and potassium dichromate standards.

In this application note, we evaluate the effectiveness of a new spectrometer for measuring the absorbance of optical filters and potassium dichromate standards.

This application note describes how FT-IR spectroscopy provides a fast and easy method for the identification of PVDF through the PerkinElmer Spectrum Two FT-IR.

This application note discusses how Raman instrumentation continues to facilitate new uses in process development and manufacturing.

Our inVia confocal Raman microscope helps forensic scientists overcome the difficulty of analyzing gunshot residues created by the introduction of lead-free ammunition.

The fast, safe, reliable matrix independent analysis of LPG samples of a wide concentration range and pressure spectra using the EA 5100 elemental analyzer is described.

A procedure for the analysis of Cd, Hg, Pb and As in cassava flours following U.S. FDA’s EAM 4.7 using a microwave digestion system for sample digestion is described.

High-absorbance scanning with the reference grade PerkinElmer LAMBDA™ 850+ UV/Vis and LAMBDA 1050+ UV–vis–NIR double monochromator spectrophotometers is described.