Application Notes: General
Quantification and Identity Testing of Soft Gel Capsules using Transmission Raman Spectroscopy
Quantification of Tablets Containing Multiple APIs Using Transmission Raman Spectroscopy
Guide to TRS100 Analytical Method Development
Quality Control Measurement of 12 Elements in Lithium Hexafluorophosphate
This study was conducted to measure 12 elements in LiPF6 electrolyte and address the challenges of buildup of carbon on the torch of ICP-OES instruments.
Determination of 14 Impurity Elements in Lithium Carbonate
Measurement of Al, Ca, Cd, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, S, Si, and Zn in Li2CO3 using method of standard addition (MSA), in Lithium (Li)-ion batteries is demonstrated.
Determination of Elemental Impurities in Graphite-Based Anodes
Fast, accurate determination of Fe, Al, As, Ba, Be, Cd, Co, Cr, Cu, K, Mg, Mn, Na, Ni, Pb, Sr, V, and Zn in graphite-based anode materials
Determination of 25 Elements in Materials for Lithium Battery Cathodes
Agilent 5110 VDV ICP-OES spectrometer used to establish rapid analysis method for determining impurities and major elements in lithium nickel cobalt manganate oxide
Lab Hacks for Analysis of Organic Samples
The Use of Certified Reference Materials in Atomic Spectroscopy for Organics
Improving Lithium-Ion Batteries eBook with Raman
Lean Manufacturing with Raman Spectroscopy
Raman Microscopy Essential Knowledge Booklet
Cutting-Edge Cryogenic Raman Microscope v2
This white paper describes applications of cryoRaman, a cryogenic Raman microscope offering VIS to NIR excitation, high magnetic fields, and full polarization control.
Measuring Toxic Elements in Workplace Filter Dusts According to EN 14385 Using ICP-MS
The PlasmaQuant ICP-MS allows for a robust, sensitive, and accurate multi-element analysis of relevant workplace hazardous substances in digested filter dusts.
Detecting Solvent Impurities Via ATR
FTIR-ATR sampling was used to detect contaminants in acetone. By evaporating the solvent directly onto the ATR crystal, the impurities were easily measured.
Thermal Analysis in the Semiconductor Packaging Industry
This application note describes the applications of thermal analysis in semiconductor assembly and packaging.
Handbook of ICP-QQQ Applications using the Agilent 8800 and 8900
This compendium contains over 80 methods for the analysis of trace elements in a wide range of sample types across a wide range of industries.
New Spectrometer Excels for Absorbance Measurements v2
In this application note, we evaluate the effectiveness of a new spectrometer for measuring the absorbance of optical filters and potassium dichromate standards.
Understanding Raman Modules and Emerging Applications
New Spectrometer Excels for Absorbance Measurements
A Practical Guide for Preparing Cannabis Samples for Heavy Metals Testing
Characterization and Analysis of PVDF Used as a Lithium-Ion Battery
This application note describes how FT-IR spectroscopy provides a fast and easy method for the identification of PVDF through the PerkinElmer Spectrum Two FT-IR.
Green Building Materials Analysis with UV/Vis-NIR and Infrared Analytical Solution
Confirmation of the Presence of Styrene Butadiene Resin (SBR) Polymer in Drywall Primer
Curing of an Optical Adhesive by UV Irradiation in the DSC 8000
Raman-based Advanced Process Control in Upstream Bioprocessing for Parameters Beyond Glucose
This application note discusses how Raman instrumentation continues to facilitate new uses in process development and manufacturing.
Raman Imaging and Correlative Techniques in Life Sciences
Analyzing Gunshot Residues with Raman Microscopy
Our inVia confocal Raman microscope helps forensic scientists overcome the difficulty of analyzing gunshot residues created by the introduction of lead-free ammunition.
Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases
The fast, safe, reliable matrix independent analysis of LPG samples of a wide concentration range and pressure spectra using the EA 5100 elemental analyzer is described.
Advancements in Precise and Accurate Analysis for Industrial Applications